XWA Power & Cable | Control Cables
KVVP cable is a copper-conductor control cable with PVC insulation, a braided copper screen and a PVC sheath. Its 450/750 V construction serves fixed control, monitoring and protection circuits in industrial electrical installations.
Rated voltage: 450/750 V AC
The braid surrounds the multicore assembly, providing a screen connection for the installed circuit. KVVP keeps the familiar KVV insulation-and-sheath system while adding the metallic screen, making the distinction visible in both the designation and the layer arrangement.

KVVP cable construction
| Layer | Construction |
|---|---|
| Conductor | Copper; solid or stranded construction specified by size |
| Insulation | PVC on each control core |
| Assembly | Multiple insulated cores laid together |
| Screen | Copper wire braid around the assembly |
| Outer sheath | PVC |

KVVP voltage and technical characteristics
| Parameter | Selected construction |
|---|---|
| Rated voltage | 450/750 V AC (U0/U) |
| Core materials | Copper / PVC insulation |
| Screen construction | Copper braid |
| Outer covering | PVC sheath |
| Photographed configuration | 21 × 1.5 mm² |
| Specification framework | GB/T 9330 control-cable family |
Screened control runs between plant equipment and panels
Monitoring and protection circuits can run between switchgear, local control stations and equipment panels. A multicore construction gathers those circuits into one route, while the copper braid provides a metallic screen around the insulated core assembly.
For a fixed industrial route, we would give core identification and the screen connection equal attention. They solve different practical problems: one supports accurate termination, while the other integrates the cable with the circuit screening and bonding arrangement.
KVVP is distinct from KVVP2, where the screen construction uses copper tape rather than the braid specified here. A steel-armoured suffix introduces another protective layer. Keeping these variants separate prevents the screen from being mistaken for mechanical armour.
The photographed sample is marked 21 × 1.5 mm² and 450/750 V. That configuration is useful for showing how a high-core-count control cable is assembled. Other core counts change the diameter and termination space, so each configuration needs its own dimensional schedule.

KVVP cable questions
What is the difference between KVV and KVVP?
KVVP adds a copper braid screen to the PVC-insulated and PVC-sheathed control construction. The screen is connected according to the installation bonding design.
Is KVVP steel-wire armoured?
The base KVVP construction uses a copper screen. A mechanically armoured control cable is identified and specified as a separate layer arrangement.
What does 21 × 1.5 mm² mean?
It denotes 21 insulated cores with a nominal conductor area of 1.5 mm² each. Circuit identification and any protective-conductor function follow the specified core arrangement.
Discuss your KVVP cable project
For a KVVP project quotation, send XWA the core count, conductor area, total length and screen specification. Include the project cable schedule when several control configurations are required.
