Aluminum Conductor for Overhead Transmission and Distribution
Aluminum conductor covers bare overhead line constructions such as AAC, AAAC, ACSR and ACAR for distribution feeders, transmission spans, substation connections and utility line projects.
XWA Aluminum Conductor
XWA manufactures aluminum conductor for overhead transmission and distribution lines, including AAC, AAAC, ACSR and ACAR constructions. The page focuses on bare overhead conductors and does not include insulated aerial bundled cable.
XWA configures conductor construction according to conductor code name, cross section, stranding, rated tensile strength, current requirement, corrosion environment, span length and the applicable project standard.
Aluminum Conductor Product Selection
These conductor families serve different mechanical, electrical and environmental requirements in overhead line design.
موصل الألومنيوم is used where overhead power lines require a balance of conductivity, وزن, قوة الشد, sag behavior, corrosion resistance and route cost. AAC is usually selected for shorter spans, AAAC for corrosion resistance and improved strength, ACSR for long spans and high mechanical loading, and ACAR for projects needing both strength and ampacity.
Unlike ABC Cable, these products are normally bare conductors. العزل, messenger configuration and bundled construction belong to a different product group and should not be mixed with bare conductor specifications.
الأداء الكهربائي
حجم الموصل, aluminum grade, stranding and operating temperature affect resistance, ampacity and voltage drop.
القوة الميكانيكية
AAAC, ACSR and ACAR are selected when span length, wind load, ice load or terrain requires higher tensile strength.
Route Environment
ساحلية, صناعي, mountainous and rural routes can require different conductor material and reinforcement choices.
Aluminum Conductor Construction
XWA produces aluminum conductor in concentric-lay stranded constructions. Depending on the conductor type, the stranding may use hard-drawn aluminum wires, أسلاك سبائك الألومنيوم, galvanized steel core wires or aluminum alloy reinforcement.
| الجميح للسيارات | Stranded hard-drawn aluminum wires for short-span overhead distribution |
| AAAC | Aluminum alloy wires for higher strength and corrosion resistance |
| ACSR | Aluminum strands around a coated steel core for higher tensile strength |
| أكار | Aluminum strands with aluminum alloy reinforcement for balanced performance |
| Supply Form | Bare conductor on export wooden or steel-wooden drums according to project schedule |
Aluminum Conductor Standards and Technical Data
Aluminum conductor specifications commonly reference IEC 61089 for round wire concentric lay overhead electrical stranded conductors. ASTM standards are also used in many international projects, including ASTM B231 for AAC, ASTM B399 for AAAC and ASTM B232 for ACSR. ACAR may be specified under project, utility or applicable ASTM/IEC requirements.
| نوع الموصل | Common Name | Typical Standard Reference | Main Selection Point |
|---|---|---|---|
| الجميح للسيارات | جميع موصلات الألومنيوم | اللجنة الانتخابية المستقلة 61089 / ASTM B231 project specifications | Conductivity and low weight for shorter spans |
| AAAC | جميع موصلات سبائك الألومنيوم | اللجنة الانتخابية المستقلة 61089 / ASTM B399 project specifications | Corrosion resistance and improved strength |
| ACSR | موصل الألمنيوم بالفولاذ المقوى | اللجنة الانتخابية المستقلة 61089 / ASTM B232 project specifications | Long spans and higher tensile strength |
| أكار | Aluminum Conductor Alloy Reinforced | مشروع, utility or applicable conductor specification | Balanced strength, ampacity and weight |
النطاقات المرجعية للتصنيع
The ranges below are general production references for early product comparison. Final conductor code, منطقة, stranding, rated tensile strength, resistance and packing are confirmed according to the approved project specification.
| غرض | Reference Range | Notes |
|---|---|---|
| Nominal Area | 10-1250مم² | Depends on conductor type and standard |
| بناء | Concentric-lay stranded | Single-material or reinforced designs |
| مادة | الألومنيوم, aluminum alloy, coated steel core where applicable | Selected by conductor family |
| Application Voltage | Overhead line system dependent | Conductor itself is selected by line design, not insulation voltage |
| التعبئة | Export wooden drum or steel-wooden drum | Drum size and length according to project schedule |
Overhead Line Applications
XWA supplies aluminum conductor for rural distribution feeders, urban distribution reinforcement, substation outgoing lines, transmission spans, river crossings, mountainous routes and grid upgrade projects.
Route design affects the conductor selection. Long spans and heavy mechanical loading may favor ACSR. Corrosive coastal or industrial routes often make AAAC attractive. ACAR can support projects where strength and ampacity must be balanced in the same conductor design.
Related Cable Pages
Related pages include كابل علوي, سائق AAAC, موصل ACSR, سائق أكار و كابل الألمنيوم.
التعليمات
What is aluminum conductor?
Aluminum conductor is a bare overhead electrical conductor made from aluminum wires, أسلاك سبائك الألومنيوم, steel-reinforced construction or alloy-reinforced construction. It is used for overhead transmission and distribution lines.
Is aluminum conductor the same as ABC Cable?
لا. This page covers bare overhead conductors such as AAC, AAAC, ACSR and ACAR. ABC Cable is an insulated aerial bundled cable product group with different construction and installation requirements.
What is the difference between AAC, AAAC, ACSR and ACAR?
AAC uses all-aluminum wires, AAAC uses aluminum alloy wires, ACSR uses aluminum strands with a steel core, and ACAR uses aluminum strands with aluminum alloy reinforcement. The choice depends on span, strength, corrosion environment and ampacity requirement.
Which standards are used for aluminum conductor?
Common references include IEC 61089 for overhead stranded conductors, ASTM B231 for AAC, ASTM B399 for AAAC and ASTM B232 for ACSR. Project or utility specifications can define additional requirements.
How does XWA prepare aluminum conductor offers?
XWA reviews conductor type, code name or nominal area, stranding, معيار, بيئة الطريق, mechanical requirement, drum length and packing requirement before confirming the conductor schedule.
Contact XWA for Aluminum Conductor Projects
XWA prepares aluminum conductor offers around conductor type, مقاس, stranding, معيار, route conditions, mechanical requirement and export packing schedule.