MV Power Cable for 6kV to 35kV Distribution Projects
MV power cable covers common IEC-rated cables from 3.6/6(7.2)kV to 18/30(36)কেভি, together with regional and project-specific 35kV-class constructions for distribution, industrial and renewable energy systems.
XWA MV Power Cable
As a medium voltage cable manufacturer, XWA supplies 6kV to 35kV cable constructions for distribution networks, সাবস্টেশন, industrial plants and renewable energy collection systems, with copper or aluminum conductors, screened insulation systems, armoring options and sheath materials matched to project specifications.
XWA’s engineering team develops each MV cable construction according to the rated voltage, কন্ডাকটরের আকার, মূল বিন্যাস, পর্দা নকশা, armoring requirement, water-blocking condition and installation environment for underground, নালী, tray and direct-burial routes.
MV Cable by IEC Voltage Rating
XWA organizes this product group around IEC U0/উ(এক) voltage designations and the common market names used for distribution, substation and industrial power systems.
North American MV Cable
North American medium voltage cable classes are normally named by nominal system voltage, while IEC cable pages use U0/উ(এক) পদবী. XWA separates these terms so voltage selection, standards discussion and cable construction remain clear.
5কেভি, 15কেভি, 25kV and 35kV Classes
North American MV Cable covers nominal voltage classes used in utility, শিল্প, renewable energy and feeder systems.
Different Naming Basis
IEC pages use U0/উ(এক), যেমন 8.7/15(17.5)কেভি, while North American schedules commonly use 5kV, 15কেভি, 25kV or 35kV class names.
Project Specification Review
XWA reviews conductor, নিরোধক স্তর, shield system, jacket, installation route and required standard scope before confirming the cable construction.
MV Cable by Model Designation
XWA also supplies published medium voltage model pages for IEC and European-style cable designations used in project specifications and tender schedules.
MV power cable is used between low-voltage distribution and high-voltage transmission systems. It supports feeder circuits, transformer substations, industrial power intake, wind and solar collection networks, mining power distribution and municipal underground grids where screened insulation and controlled earthing are required.
XWA produces medium voltage cable in single-core and three-core constructions, including copper wire screened cable, copper tape screened cable, steel wire armoured cable, steel tape armoured cable, aluminum wire armoured cable and water-blocked designs for demanding route conditions.
Distribution Voltage
Common project classes include 3.6/6kV, 6/10কেভি, 8.7/15কেভি, 12/20কেভি, 18/30kV and 26/35kV cable designs.
Screened XLPE System
Manufactured with conductor screen, XLPE নিরোধক, insulation screen and metallic screen layers for stable electric field control.
Installation Options
Factory configurations cover duct, ট্রে, সরাসরি দাফন, টানেল, substation, renewable energy and industrial feeder applications.
MV XLPE Cable Construction
XWA produces medium voltage XLPE cable with a screened insulation system and route-specific mechanical protection. A typical MV cable includes a compacted copper or aluminum conductor, কন্ডাকটর পর্দা, XLPE নিরোধক, অন্তরণ পর্দা, ধাতব পর্দা, bedding layer, optional armor and an outer sheath selected for the installation environment.
| কন্ডাক্টর | তামা বা অ্যালুমিনিয়াম, circular compacted or sector-shaped where applicable |
| Core Arrangement | একক-কোর, three-core and triplex configurations for MV distribution systems |
| নিরোধক সিস্টেম | Conductor screen, XLPE insulation and insulation screen |
| ধাতব পর্দা | Copper tape screen or copper wire screen with continuity options |
| Armor and Sheath | SWA, STA, AWA, পিভিসি, পিই, LSZH and water-blocking options by route condition |
MV Cable Voltage Range and Technical Data
XWA manufactures medium voltage power cable for distribution and industrial systems from 3.6/6kV to 26/35(40.5)কেভি. আইইসি 60502-2 is normally used for extruded-insulation power cables from 6kV up to 30kV rated voltage classes. জন্য 26/35(40.5)kV systems, XWA confirms the applicable project, utility or local specification before finalizing the cable construction.
| ভোল্টেজ ক্লাস | Common Voltage Designation | Applicable Standard | Product Page |
|---|---|---|---|
| 6কেভি | 3.6/6(7.2)কেভি | আইইসি 60502-2 project specifications | 6কেভি কেবল |
| 10কেভি | 6/10(12)কেভি | আইইসি 60502-2 project specifications | 10কেভি কেবল |
| 15কেভি | 8.7/15(17.5)কেভি | আইইসি 60502-2 project specifications | 15কেভি কেবল |
| 20কেভি | 12/20(24)কেভি | আইইসি 60502-2 project specifications | 20কেভি কেবল |
| 30কেভি | 18/30(36)কেভি | আইইসি 60502-2 project specifications | 33কেভি কেবল |
| 35কেভি | 26/35(40.5)কেভি | প্রকল্প, utility or local specifications | 35কেভি কেবল |
ম্যানুফ্যাকচারিং রেফারেন্স রেঞ্জ
The technical data below summarizes common XWA manufacturing ranges for XLPE medium voltage cable by voltage class. Final conductor size, নিরোধক বেধ, overall diameter and ampacity are confirmed according to the approved cable schedule, installation conditions and applicable project specification.
| ভোল্টেজ ক্লাস | Conductor Size Range | Reference Insulation Thickness | প্রায়. সামগ্রিক ব্যাস | Reference Ampacity Range |
|---|---|---|---|---|
| 3.6/6(7.2)কেভি | 25-630মিমি² | 2.5-3.4মিমি | 28-78মিমি | 120-850ক |
| 6/10(12)কেভি | 25-1000মিমি² | 3.4-4.5মিমি | 32-88মিমি | 130-980ক |
| 8.7/15(17.5)কেভি | 35-1000মিমি² | 4.5-5.5মিমি | 36-96মিমি | 150-1050ক |
| 12/20(24)কেভি | 35-1000মিমি² | 5.5-6.8মিমি | 40-104মিমি | 160-1100ক |
| 18/30(36)কেভি | 50-1000মিমি² | 8.0-9.5মিমি | 48-118মিমি | 180-1150ক |
| 26/35(40.5)কেভি | 95-1000মিমি² | 10.5-12মিমি | 58-130মিমি | 230-1200ক |
Distribution, Substation and Renewable Energy Routes
As an international medium voltage cable manufacturer, XWA focuses on underground distribution circuits, transformer substations, industrial feeders, mining power systems, tunnel routes and renewable energy collection networks. Route design can include steel wire armor, ইস্পাত টেপ বর্ম, অ্যালুমিনিয়াম তারের বর্ম, PE sheath, LSZH sheath, semiconductive sheath and water-blocked layers according to mechanical, environmental and earthing requirements.
Medium voltage cable production is arranged around cable construction, dimensional control, insulation extrusion, পর্দা ধারাবাহিকতা, sheath integrity and routine testing records within the agreed project scope.
Related Cable Categories
Related cable categories include এলভি পাওয়ার ক্যাবল, উচ্চ ভোল্টেজ তারের, ওভারহেড কেবল, সাবমেরিন ক্যাবল, এবিসি কেবল, কন্ট্রোল ক্যাবল এবং রাবার তার.
FAQ
What is MV power cable?
MV power cable is an insulated medium voltage cable system used for electrical distribution between low-voltage equipment and high-voltage transmission networks. It commonly includes a conductor, কন্ডাকটর পর্দা, XLPE নিরোধক, অন্তরণ পর্দা, ধাতব পর্দা, বিছানাপত্র, optional armor and outer sheath.
What voltage range does XWA MV power cable cover?
XWA manufactures common medium voltage cable classes from 3.6/6(7.2)kV to 26/35(40.5)কেভি, including 6kV, 10কেভি, 11কেভি, 15কেভি, 20কেভি, 30কেভি, 33kV and 35kV distribution systems.
Which standard applies to MV XLPE power cable?
আইইসি 60502-2 is normally used for extruded-insulation medium voltage power cable through 18/30(36)কেভি. জন্য 26/35(40.5)kV systems, XWA confirms the applicable project, utility or local specification before production.
How are IEC and North American MV cable voltage classes different?
IEC cable pages normally use U0/উ(এক) voltage designations such as 12/20(24)কেভি. North American MV cable schedules commonly use nominal voltage classes such as 5kV, 15কেভি, 25kV and 35kV, so XWA reviews the required standard scope before confirming the cable construction.
What MV cable constructions are available?
XWA supplies single-core and three-core MV cable constructions with copper or aluminum conductors, copper tape or copper wire screens, পিভিসি, PE or LSZH sheaths and armored or unarmored options.
Can MV cable be armoured or water-blocked?
হ্যাঁ. XWA manufactures MV cable with steel wire armor, steel tape armor or aluminum wire armor for mechanical protection. Water-blocking layers and PE sheath options can be configured for underground, duct and wet-route conditions.
How does XWA control MV cable production quality?
XWA prepares MV cable production with conductor preparation, triple extrusion where applicable, screen application, armouring, sheath extrusion, মাত্রিক চেক, voltage testing and routine test records according to the agreed specification.
How does XWA prepare MV cable offers?
XWA reviews voltage designation, কন্ডাকটর উপাদান এবং আকার, মূল গণনা, screen type, বর্ম, খাপ উপাদান, ইনস্টলেশন রুট, standard and drum length before preparing the cable construction and offer.
Contact XWA for MV Cable Projects
XWA prepares MV cable offers around voltage class, কন্ডাকটর উপাদান, core construction, screen type, বর্ম, sheath design and required standard, with cable construction matched to the confirmed project specification.