LiYCY Cable for Industrial Signal and Control Systems

এক্সডব্লিউএ পাওয়ার & তারের | Control Cables

LiYCY cable combines flexible copper conductors, PVC insulation and a copper braid screen for signal connections in industrial equipment. Its compact multicore construction brings measurement and control circuits together inside one outer sheath.

রেটেড ভোল্টেজ: 250/250 V AC

The construction presented here is the 250/250 V multicore version. It is a useful starting point for process-control equipment and electronic interfaces where electromagnetic screening matters alongside routing space. LiYCY TP is the twisted-pair variant; its pair arrangement deserves its own specification rather than a change to the core-count label.

LiYCY cable with an exposed braid screen and insulated copper cores.
LiYCY cable with an exposed braid screen and insulated copper cores.

LiYCY cable construction

স্তরনির্মাণ
কন্ডাক্টরFlexible fine-stranded copper
Core insulationPVC around each conductor
AssemblyMulticore layout; twisted-pair versions specified separately
পর্দাCopper wire braid surrounding the insulated assembly
বাইরের খাপপিভিসি, commonly grey
LiYCY Cable Layer Arrangement schematic
LiYCY Cable Layer Arrangement schematic.

LiYCY voltage and technical characteristics

প্যারামিটারSelected construction
Rated voltage of selected version250/250 V AC (U0/U)
কন্ডাক্টরক্লাস 5 copper reference construction
নিরোধক / খাপপিভিসি / পিভিসি
Screen arrangementOverall copper braid
Circuit arrangementMulticore; TP variant uses twisted pairs

Recommended reference dimensions

Cores × areaReference OD (মিমি)Reference mass (কেজি/কিমি)
4 × 1.5 মিমি²9.0129
7 × 0.5 মিমি²7.084
7 × 1.0 মিমি²9.2158

Recommended reference data for the selected 250/250 V multicore construction. Final dimensions and mass follow the agreed XWA datasheet.

A screened connection for the signal route

Control cabinets, measuring units and industrial electronic equipment need a defined connection between field signals and the receiving circuit. The braid surrounds the core assembly and gives the cable a conductive screen that can be connected at the equipment interface. Its effectiveness in the installed system also depends on termination and routing.

We would favour a paired construction when the circuit uses a balanced signal pair, rather than treating any two numbered cores as a designed pair. This matters because conductor pairing and overall screening address different parts of the interference problem. The selected interface still determines electrical requirements such as capacitance or impedance.

For a dense multicore connection, core identification and the terminal drawing are as important as the outer appearance. A coloured or numbered-core version changes identification at the panel; the protective conductor arrangement is a separate circuit requirement. Clear identification reduces ambiguity when several cable runs arrive at the same cabinet.

The product photograph shows a labelled LiYCY sample and its exposed braid. A photograph is useful for understanding the layer arrangement, while the electrical schedule defines the voltage and signal duty. Plain multicore LiYCY and LiYCY TP remain separate configurations in that schedule.

LiYCY Industrial Control Connections schematic
LiYCY Industrial Control Connections schematic.

LiYCY cable questions

What is the difference between LiYCY and LiYCY TP?

TP identifies twisted pairs. A plain multicore cable groups individual insulated cores; a TP construction groups the signal conductors into pairs before the overall assembly.

Is every LiYCY cable rated 500 ভি?

LiYCY is offered in different electrical constructions. This page covers a 250/250 V multicore reference version; another version needs its matching rating and dimensional schedule.

Can LiYCY replace an RS485 cable?

An RS485 connection needs the electrical characteristics specified for its interface and route. A braid alone does not establish the required characteristic impedance.

Discuss your LiYCY cable project

Send your LiYCY core or pair arrangement, conductor area and total project length to XWA for a cable quotation. Include the signal interface where electrical transmission parameters are specified.

    একটি বিনামূল্যে উদ্ধৃতি পান 24 ঘন্টা

    ইমেইল*:

    নাম*:

    আপনার দেশ:

    টেলিফোন*:

    আপনার প্রয়োজনীয়তা*: