MV Power Cable for 6kV to 35kV Distribution Projects
MV power cable covers common IEC-rated cables from 3.6/6(7.2)kV to 18/30(36)กิโลโวลต์, together with regional and project-specific 35kV-class constructions for distribution, industrial and renewable energy systems.
XWA MV Power Cable
As a medium voltage cable manufacturer, XWA supplies 6kV to 35kV cable constructions for distribution networks, substations, industrial plants and renewable energy collection systems, with copper or aluminum conductors, screened insulation systems, armoring options and sheath materials matched to project specifications.
XWA’s engineering team develops each MV cable construction according to the rated voltage, ขนาดตัวนำ, core arrangement, screen design, armoring requirement, water-blocking condition and installation environment for underground, duct, tray and direct-burial routes.
MV Cable by Voltage Class
Explore distribution cable classes and their product specifications. U0 is the conductor-to-earth rating, U the conductor-to-conductor rating, and Um the highest system voltage for the cable.






The project network voltage, earthing arrangement and fault-clearing time determine the required cable rating. For an 11 kV system, สำรวจ 11kV cable range and its specified U0/U(หนึ่ง) ratings.
North American MV Cable
North American medium voltage cable classes are normally named by nominal system voltage, while IEC cable pages use U0/คุณ(หนึ่ง) การกำหนด. XWA separates these terms so voltage selection, standards discussion and cable construction remain clear.
5กิโลโวลต์, 15กิโลโวลต์, 25kV and 35kV Classes
North American MV Cable covers nominal voltage classes used in utility, ทางอุตสาหกรรม, renewable energy and feeder systems.
Different Naming Basis
IEC pages use U0/คุณ(หนึ่ง), such as 8.7/15(17.5)กิโลโวลต์, while North American schedules commonly use 5kV, 15กิโลโวลต์, 25kV or 35kV class names.
Project Specification Review
XWA reviews conductor, ระดับฉนวน, shield system, jacket, installation route and required standard scope before confirming the cable construction.
Medium Voltage Cable Models
Compare conductor material, ฝัก, water protection and core arrangement across the screened XLPE cable range.
PVC and PE Sheathed Cables




Water-Blocked MV Cables



Halogen-Free and Three-Core Cables
MV power cable is used between low-voltage distribution and high-voltage transmission systems. It supports feeder circuits, สถานีย่อยหม้อแปลงไฟฟ้า, การบริโภคพลังงานทางอุตสาหกรรม, wind and solar collection networks, mining power distribution and municipal underground grids where screened insulation and controlled earthing are required.
XWA produces medium voltage cable in single-core and three-core constructions, including copper wire screened cable, copper tape screened cable, steel wire armoured cable, steel tape armoured cable, aluminum wire armoured cable and water-blocked designs for demanding route conditions.
Distribution Voltage
Common project classes include 3.6/6kV, 6/10กิโลโวลต์, 8.7/15กิโลโวลต์, 12/20กิโลโวลต์, 18/30kV and 26/35kV cable designs.
Screened XLPE System
Manufactured with conductor screen, ฉนวน XLPE, insulation screen and metallic screen layers for stable electric field control.
Installation Options
Factory configurations cover duct, tray, direct burial, tunnel, substation, renewable energy and industrial feeder applications.
MV XLPE Cable Construction
XWA produces medium voltage XLPE cable with a screened insulation system and route-specific mechanical protection. A typical MV cable includes a compacted copper or aluminum conductor, หน้าจอตัวนำ, ฉนวน XLPE, หน้าจอฉนวน, หน้าจอโลหะ, bedding layer, optional armor and an outer sheath selected for the installation environment.
| คอนดักเตอร์ | Compacted copper or aluminium conductors for the selected MV design |
| Core Arrangement | Single-core, three-core and triplex configurations for MV distribution systems |
| Insulation System | หน้าจอตัวนำ, ฉนวน XLPE และหน้าจอฉนวน |
| หน้าจอเมทัลลิก | Copper wires or copper tape, with screen area and bonding matched to the circuit |
| Armor and Sheath | พีวีซี, PE or LSZH sheath; SWA or STA for specified multicore designs, and non-magnetic armour for single-core AC designs |
For a wet underground route, we would consider the sheath and water barriers together. A PE jacket protects the outside of the cable, while longitudinal and radial barriers address different paths of moisture entry.

MV Cable Ratings and Construction Parameters
XWA manufactures medium voltage power cable for distribution and industrial systems from 3.6/6kV to 26/35(40.5)กิโลโวลต์. ไออีซี 60502-2 is normally used for extruded-insulation power cables from 6kV up to 30kV rated voltage classes. สำหรับ 26/35(40.5)kV systems, XWA confirms the applicable project, utility or local specification before finalizing the cable construction.
| ระดับแรงดันไฟฟ้า | Common Voltage Designation | Applicable Standard | Product Page |
|---|---|---|---|
| 6กิโลโวลต์ | 3.6/6(7.2)กิโลโวลต์ | ไออีซี 60502-2 project specifications | 6สายเควี |
| 10กิโลโวลต์ | 6/10(12)กิโลโวลต์ | ไออีซี 60502-2 project specifications | 10สายเควี |
| 15กิโลโวลต์ | 8.7/15(17.5)กิโลโวลต์ | ไออีซี 60502-2 project specifications | 15สายเควี |
| 20กิโลโวลต์ | 12/20(24)กิโลโวลต์ | ไออีซี 60502-2 project specifications | 20สายเควี |
| 30กิโลโวลต์ | 18/30(36)กิโลโวลต์ | ไออีซี 60502-2 project specifications | 33สายเควี |
| 35กิโลโวลต์ | 26/35(40.5)กิโลโวลต์ | Project, utility or local specifications | 35สายเควี |
What Defines the Finished Cable
Conductor area, screen size and core arrangement define the electrical design; sheath and armour determine how the cable fits its route. The finished diameter and mass follow that complete construction.
| พารามิเตอร์ | Configuration | Practical effect |
|---|---|---|
| คอนดักเตอร์ | Copper or aluminium; cross-section specified for the circuit | ความต้านทาน, การสูญเสีย, termination size and handling weight |
| การจัดเรียงหลัก | Single-core circuits, triplex arrangements or three-core cable | Route space, pulling arrangement and accessories |
| ฉนวนกันความร้อน | XLPE with conductor and insulation screens | Insulation thickness follows the rated voltage and product specification |
| หน้าจอเมทัลลิก | Wire or tape construction; screen area specified separately | Earth-fault duty and the bonding arrangement |
| การป้องกันภายนอก | พีวีซี, วิชาพลศึกษา, LSZH; specified armour or water barriers | Mechanical protection, moisture exposure and fire-performance requirements |
| Finished dimensions | Model-specific diameter, mass and bending data | Duct clearance, drum planning, pulling and termination fit |

Distribution, Substation and Renewable Energy Routes
As an international medium voltage cable manufacturer, XWA focuses on underground distribution circuits, สถานีย่อยหม้อแปลงไฟฟ้า, เครื่องป้อนอุตสาหกรรม, mining power systems, tunnel routes and renewable energy collection networks. Route design can include steel wire armor, steel tape armor, aluminum wire armor, PE sheath, LSZH sheath, semiconductive sheath and water-blocked layers according to mechanical, environmental and earthing requirements.
Medium voltage cable production is arranged around cable construction, dimensional control, การอัดขึ้นรูปฉนวน, screen continuity, sheath integrity and routine testing records within the agreed project scope.
MV Cable Engineering Resources
Explore the details behind screen design, installation routes and factory testing.
Screen bonding
Single-point, both-end and cross-bonding arrangements for metallic screens.
Underground routes
How route conditions influence the sheath, water protection and installation design.
Partial discharge testing
What the test checks and how the test record supports cable inspection.
Related cable ranges: low voltage power cable, สายไฟฟ้าแรงสูง, submarine cable.
Medium Voltage Cable Questions
What is MV power cable?
MV power cable is an insulated medium voltage cable system used for electrical distribution between low-voltage equipment and high-voltage transmission networks. It commonly includes a conductor, หน้าจอตัวนำ, ฉนวน XLPE, หน้าจอฉนวน, หน้าจอโลหะ, bedding, เกราะเสริมและปลอกด้านนอก.
What voltage range does XWA MV power cable cover?
XWA manufactures common medium voltage cable classes from 3.6/6(7.2)kV to 26/35(40.5)กิโลโวลต์, including 6kV, 10กิโลโวลต์, 11กิโลโวลต์, 15กิโลโวลต์, 20กิโลโวลต์, 30กิโลโวลต์, 33kV and 35kV distribution systems.
Which standard applies to MV XLPE power cable?
ไออีซี 60502-2 is normally used for extruded-insulation medium voltage power cable through 18/30(36)กิโลโวลต์. สำหรับ 26/35(40.5)kV systems, XWA confirms the applicable project, utility or local specification before production.
Are IEC 15kV and North American 15kV cable ratings the same?
IEC schedules identify U0/U(หนึ่ง), for example 8.7/15(17.5)กิโลโวลต์. North American 15kV class specifications also use an insulation level and their applicable product standard. The nominal class name alone does not establish the same cable construction or rating.
What MV cable constructions are available?
XWA supplies single-core and three-core MV cable constructions with copper or aluminum conductors, copper tape or copper wire screens, พีวีซี, PE or LSZH sheaths and armored or unarmored options.
How do N2XS2Y, N2XS(เอฟ)2Y and N2XS(ฟลอริด้า)2Y differ?
N2XS2Y uses a PE outer sheath. N2XS(เอฟ)2Y adds longitudinal water blocking, while N2XS(ฟลอริด้า)2Y combines longitudinal blocking with a radial moisture barrier. The route moisture conditions determine which protection is appropriate.
How does XWA control MV cable production quality?
XWA prepares MV cable production with conductor preparation, triple extrusion where applicable, screen application, armoring, sheath extrusion, dimensional checks, voltage testing and routine test records according to the agreed specification.
How does XWA prepare MV cable offers?
XWA reviews voltage designation, วัสดุและขนาดของตัวนำ, core count, screen type, armor, sheath material, installation route, standard and drum length before preparing the cable construction and offer.
Contact XWA for MV Cable Projects
XWA prepares MV cable offers around voltage class, วัสดุตัวนำ, core construction, screen type, armor, sheath design and required standard, with cable construction matched to the confirmed project specification.
