NA2XS2Y-Kabel ist ein Aluminiumleiter, single-core MV cable with screened XLPE insulation, a copper wire screen and PE outer sheath for fixed power distribution.
This aluminium/XLPE/PE construction serves utility feeders, Industrieversorgung und Umspannwerksanschlüsse. For routes requiring dedicated water blocking, Die (F) Und (FL) variants add their respective moisture barriers.

KONSTRUKTION
- Phasenleiter
- Verseiltes Aluminium
- Elektrische Isolierung
- XLPE zwischen Halbleiterleiter und Isolationsschirmen
- Metallschirm
- Kupferdrähte mit Kupfer-Gegenwendelband
- Schutz
- Separator und schwarzer PE-Mantel; keine mechanische Panzerung
EIGENSCHAFTEN
- Referenzdesign
- Single-Core, 12/20 (24) kV
- Servicekontext
- Stationäre Distribution und Industrieversorgung
- Mantelverhalten
- PE ist nicht automatisch flammhemmend oder ein LSZH-Brandschutzdesign
- Standards
- HD 620 / DIN VDE 0276-620; relevanten IEC 60502-2 Anforderungen
NA2XS2Y-Projektanfragen
Besprechen Sie die erforderliche Spannung, Aluminiumleitergröße, Metallschirm und Einbaubedingungen mit XWA.
NA2XS2Y 12/20 kV-Referenzdaten
Empfohlene Referenzdaten: one published aluminium single-core construction. The selected values support preliminary planning; final supply dimensions and ratings follow the approved XWA specification and project calculation.
| Dirigent/Bildschirm (mm²) | Gleichstromwiderstand 20°C (Ω/km) | Isolierung (mm) | Ca. VON (mm) | Ca. Masse (kg/km) | Luft, Klee (A) | Boden, Klee (A) |
|---|---|---|---|---|---|---|
| 1 X 95/16 | 0.320 | 5.5 | 32 | 999 | 280 | 251 |
| 1 X 150/25 | 0.206 | 5.5 | 35 | 1301 | 366 | 319 |
| 1 X 240/25 | 0.125 | 5.5 | 39 | 1671 | 496 | 417 |
| 1 X 300/25 | 0.100 | 5.5 | 41 | 1893 | 569 | 471 |
| 1 X 400/35 | 0.078 | 5.5 | 44 | 2357 | 660 | 535 |
| 1 X 500/35 | 0.061 | 5.5 | 47 | 2757 | 766 | 609 |
| 1 X 630/35 | 0.047 | 5.5 | 51 | 3227 | 861 | 690 |
| 1 X 1000/35 | 0.0291 | 5.5 | 61 | 4824 | 1187 | 863 |
Referenzinstallation: ein Kreislauf, berührendes Kleeblatt, Schirme an beiden Enden geerdet; Luft 30°C ohne direkte Sonne; Boden 20°C, Tiefe 0.7 M, thermischer Widerstand 1.0 K·m/W nass und 2.5 K·m/W trocken; Keine Wärmequellen in der Nähe. Maximale Referenzleitertemperatur: 90°C.
Die Referenz verwendet 5.5 mm Nennisolierung. Die Dicke des PE-Mantels beträgt 2.5 mm durch die aufgeführten 500 mm² Größe, 2.6 mm bei 630 mm² und 2.8 mm bei 1000 mm². Alle Maße und Masse sind konstruktionsspezifisch.
Phasengröße, Schirmfläche und Gesamtkabelmasse
In 1×240/25, 240 mm² identifies the aluminium phase conductor and 25 mm² the separate metallic screen. Screen area is selected for earth-fault duty and bonding.
Für die Auserwählten 240/25 Referenz, diameter is approximately 39 mm and mass 1.671 kg/m. A 500 m length contains approximately 835.5 kg of finished cable; drum and packing mass are added for shipment.
Changing from copper to aluminium affects conductor size, aktuelle Bewertung, voltage drop and connector selection. Finished diameter also determines entry space and handling requirements.
Aluminiumverbindungen und Kupferabschirmung
The aluminium conductor carries phase current inside the insulation. The copper screen sits outside the semiconductive insulation screen, with a separate connection at the cable end.
Lugs and connectors are selected for the aluminium conductor form and size. A copper equipment connection uses a compatible transition system, with preparation, tools and crimping or tightening procedures specified by the connector manufacturer.
Abschlusskits verfügen auch über verschiedene Isolationsdurchmesser. Ein Bausatz, der nur aus dem Leiterbereich ausgewählt wird, kann diesen Bereich verfehlen. Für die Auserwählten 240/25 Konstruktion, Der Referenzisolationsdurchmesser beträgt ungefähr 30.4 mm; es ist anders als das 39 mm Gesamtdurchmesser, der für die äußere Kabeleinführung verwendet wird.
PE, PVC- und wasserblockierte Alternativen
| Zugehöriges Kabel | Konstruktionsunterschied |
|---|---|
| NA2XSY-Kabel | Aluminium-abgeschirmtes Mittelspannungskabel mit PVC-Außenmantel anstelle von PE. |
| N2XS2Y-Kabel | Kupferphasenleiter mit XLPE-Isolierung und PE-Mantel. |
| NA2XS(F)2und Kabel | Zur spezifizierten Aluminiumkonstruktion wurden längsgerichtete wasserblockierende Komponenten hinzugefügt. |
| NA2XS(FL)2Y | Wasserblockierung in Längsrichtung kombiniert mit einer laminierten radialen Feuchtigkeitsbarriere. |
The PE sheath provides outer protection. Dedicated water-blocking layers and mechanical armour are additional construction options for routes that require them.
PE is halogen-free, while low-smoke and flame-retardant performance require the specified material system and tests. Building and tunnel routes follow their applicable fire-performance requirements.
Unterirdische Routen und feste Verteilung
NA2XS2Y wird in festen Untergrundnetzen eingesetzt, Kanäle, Kabelmanagementsysteme und industrielle Verteilung, bei denen die angegebenen Mantel- und Installationsanforderungen zur Route passen. Die Bodenverhältnisse bestimmen, ob eine direkte Erdverlegung angemessen ist; Felsen, Auswirkungen, Durch Ausgrabungen oder konzentrierte Belastungen kann ein zusätzlicher Schutz erforderlich sein.
Flat or trefoil formation, Abstand, neighbouring circuits and screen bonding determine circuit losses and thermal conditions. The table uses the stated reference arrangement; duct banks and other layouts use the applicable current-rating calculation.
Pulling loads and bending limits follow the actual cable geometry, pulling method and accessory requirements. Sehen Biegeradius und Zugspannung des Mittelspannungskabels for the route-planning relationships.
Fertigungsdefinition und Testumfang
Die Fertigungsdefinition identifiziert Leitermaterial und -form, Isolierungs- und Mantelabmessungen, die metallische Schirmanordnung, Spannungsbezeichnung und anwendbare Tests. Der entsprechende Zeitplan deckt den Widerstand ab, Isolations- und Entladungsleistung, sowie die Mantelanforderungen des vereinbarten Designs.
Der offizieller Veröffentlichungsbereich describes the fixed-distribution cable framework. The project specification identifies applicable HD/VDE or IEC requirements, tests and any required product approvals.
Fragen zum NA2XS2Y-Kabel
Warum hat ein Aluminiumkabel einen Kupferschirm??
The aluminium phase conductor carries load current, while the copper wire screen performs its specified electrical and earth-fault duties outside the insulation.
Was ändert sich zwischen NA2XS2Y und NA2XSY??
NA2XS2Y uses a PE sheath; NA2XSY uses PVC. The sheath choice affects the installation environment and specified fire-performance properties.
Ist gewöhnliches NA2XS2Y in Längsrichtung durch Wasser blockiert??
Der (F) version adds dedicated longitudinal water-blocking components in the screen region. Standard NA2XS2Y uses the basic PE-sheathed construction.
Kann ein 240 Es kann ein mm2-Kupferanschluss verwendet werden 240 mm2 NA2XS2Y?
The connector must be suitable for aluminium, the conductor form and its dimensions. Connections to copper equipment use a compatible transition system and the specified preparation method.
Produktfamilien: Mittelspannungskabel · Kabeltypen und -modelle
Kontaktieren Sie XWA: info@xwacable.com · WhatsApp · Kontaktseite
