MV Power Cable for 6kV to 35kV Distribution Projects
MV power cable covers common IEC-rated cables from 3.6/6(7.2)kV to 18/30(36)kV, together with regional and project-specific 35kV-class constructions for distribution, industrial and renewable energy systems.
XWA MV Power Cable
As a medium voltage cable manufacturer, XWA supplies 6kV to 35kV cable constructions for distribution networks, trafostanice, industrial plants and renewable energy collection systems, sa bakrenim ili aluminijumskim provodnicima, ekranizovani izolacioni sistemi, opcije oklopa i materijali omotača usklađeni sa projektnim specifikacijama.
XWA-in inženjering tim razvija svaku konstrukciju SN kabla prema nazivnom naponu, veličina provodnika, jezgro aranžmana, dizajn ekrana, zahtjev za oklopom, stanje blokiranja vode i okruženje za postavljanje pod zemljom, duct, tray i direktni putevi ukopa.
MV kabel prema IEC naponu
XWA organizira ovu grupu proizvoda oko IEC U0/U(Jedan) oznake napona i uobičajena tržišna imena koja se koriste za distribuciju, trafostanica i industrijskih energetskih sistema.
North American MV Cable
North American medium voltage cable classes are normally named by nominal system voltage, while IEC cable pages use U0/U(Jedan) designations. XWA separates these terms so voltage selection, standards discussion and cable construction remain clear.
5kV, 15kV, 25kV and 35kV Classes
North American MV Cable covers nominal voltage classes used in utility, industrijski, renewable energy and feeder systems.
Different Naming Basis
IEC pages use U0/U(Jedan), kao što su 8.7/15(17.5)kV, while North American schedules commonly use 5kV, 15kV, 25kV or 35kV class names.
Project Specification Review
XWA reviews conductor, nivo izolacije, shield system, jakna, installation route and required standard scope before confirming the cable construction.
MV Cable by Model Designation
XWA also supplies published medium voltage model pages for IEC and European-style cable designations used in project specifications and tender schedules.
SN kabl za napajanje is used between low-voltage distribution and high-voltage transmission systems. It supports feeder circuits, transformer substations, industrial power intake, wind and solar collection networks, mining power distribution and municipal underground grids where screened insulation and controlled earthing are required.
XWA produces medium voltage cable in single-core and three-core constructions, including copper wire screened cable, copper tape screened cable, steel wire armoured cable, steel tape armoured cable, aluminum wire armoured cable and water-blocked designs for demanding route conditions.
Distribution Voltage
Common project classes include 3.6/6kV, 6/10kV, 8.7/15kV, 12/20kV, 18/30kV and 26/35kV cable designs.
Screened XLPE System
Manufactured with conductor screen, XLPE izolacija, insulation screen and metallic screen layers for stable electric field control.
Installation Options
Factory configurations cover duct, poslužavnik, direktno sahranjivanje, tunel, trafostanica, renewable energy and industrial feeder applications.
MV XLPE Cable Construction
XWA proizvodi srednjenaponski XLPE kabl sa ekranizovanim izolacionim sistemom i mehaničkom zaštitom specifičnom za rutu. Tipičan SN kabl uključuje kompaktni bakarni ili aluminijumski provodnik, ekran provodnika, XLPE izolacija, izolacioni ekran, metalni ekran, sloj posteljine, opcioni oklop i vanjski omotač odabran za okruženje instalacije.
| Dirigent | Bakar ili aluminijum, kružno zbijeno ili u obliku sektora gdje je primjenjivo |
| Core Arrangement | Single-core, trojezgrene i triplex konfiguracije za SN distributivne sisteme |
| Izolacijski sistem | Ekran provodnika, XLPE izolacija i izolacijski ekran |
| Metalik ekran | Ekran od bakrene trake ili ekran od bakrene žice sa opcijama kontinuiteta |
| Oklop i omotač | SWA, STA, AWA, PVC, PE, LSZH i opcije za blokiranje vode prema stanju rute |
Raspon napona SN kabla i tehnički podaci
XWA proizvodi srednjenaponski energetski kabl za distributivne i industrijske sisteme od 3,6/6kV do 26/35(40.5)kV. IEC 60502-2 obično se koristi za strujne kablove sa ekstrudiranom izolacijom od 6kV do 30kV klase nazivnog napona. Za 26/35(40.5)kV sistemi, XWA potvrđuje primjenjivi projekat, komunalne ili lokalne specifikacije prije finalizacije konstrukcije kabela.
| Voltage Class | Zajednička oznaka napona | Primjenjivi standard | Stranica proizvoda |
|---|---|---|---|
| 6kV | 3.6/6(7.2)kV | IEC 60502-2 specifikacije projekta | 6kV Cable |
| 10kV | 6/10(12)kV | IEC 60502-2 specifikacije projekta | 10kV Cable |
| 15kV | 8.7/15(17.5)kV | IEC 60502-2 specifikacije projekta | 15kV Cable |
| 20kV | 12/20(24)kV | IEC 60502-2 specifikacije projekta | 20kV Cable |
| 30kV | 18/30(36)kV | IEC 60502-2 specifikacije projekta | 33kV Cable |
| 35kV | 26/35(40.5)kV | Projekt, uslužne ili lokalne specifikacije | 35kV Cable |
Proizvodni referentni rasponi
Tehnički podaci u nastavku sumiraju uobičajene proizvodne opsege XWA za srednjenaponske kablove od XLPE po naponskoj klasi. Konačna veličina provodnika, debljina izolacije, ukupni prečnik i kapacitet su potvrđeni prema odobrenom rasporedu kablova, uslove ugradnje i primjenjivu specifikaciju projekta.
| Voltage Class | Conductor Size Range | Reference Insulation Thickness | Pribl. Overall Diameter | Reference Ampacity Range |
|---|---|---|---|---|
| 3.6/6(7.2)kV | 25-630mm² | 2.5-3.4mm | 28-78mm | 120-850A |
| 6/10(12)kV | 25-1000mm² | 3.4-4.5mm | 32-88mm | 130-980A |
| 8.7/15(17.5)kV | 35-1000mm² | 4.5-5.5mm | 36-96mm | 150-1050A |
| 12/20(24)kV | 35-1000mm² | 5.5-6.8mm | 40-104mm | 160-1100A |
| 18/30(36)kV | 50-1000mm² | 8.0-9.5mm | 48-118mm | 180-1150A |
| 26/35(40.5)kV | 95-1000mm² | 10.5-12mm | 58-130mm | 230-1200A |
Distribucija, Substation and Renewable Energy Routes
As an international medium voltage cable manufacturer, XWA focuses on underground distribution circuits, transformer substations, industrijske hranilice, mining power systems, tunnel routes and renewable energy collection networks. Route design can include steel wire armor, oklop od čelične trake, oklop od aluminijumske žice, PE omotač, LSZH plašt, poluprovodni omotač i slojevi blokirani vodom prema mehaničkim, zahtjevi za okoliš i uzemljenje.
Proizvodnja srednjenaponskih kablova je raspoređena oko kablovske konstrukcije, dimenziona kontrola, ekstruzija izolacije, kontinuitet ekrana, integritet omotača i evidenciju o rutinskom ispitivanju u okviru dogovorenog projektnog opsega.
Povezane kategorije kablova
Povezane kategorije kablova uključuju LV kabl za napajanje, Visokonaponski kabel, Overhead Cable, Submarine Cable, ABC Cable, Control Cable i Rubber Cable.
FAQ
Šta je SN kabl za napajanje?
SN kabl za napajanje je izolovani srednjenaponski kablovski sistem koji se koristi za distribuciju električne energije između niskonaponske opreme i visokonaponskih prenosnih mreža. Obično uključuje provodnika, ekran provodnika, XLPE izolacija, izolacioni ekran, metalni ekran, posteljina, opcioni oklop i vanjski omotač.
Koji raspon napona pokriva XWA MV kabel za napajanje?
XWA proizvodi uobičajene klase srednjenaponskih kablova od 3.6/6(7.2)kV to 26/35(40.5)kV, uključujući 6kV, 10kV, 11kV, 15kV, 20kV, 30kV, 33kV i 35kV distributivni sistemi.
Which standard applies to MV XLPE power cable?
IEC 60502-2 is normally used for extruded-insulation medium voltage power cable through 18/30(36)kV. Za 26/35(40.5)kV sistemi, XWA potvrđuje primjenjivi projekat, utility or local specification before production.
How are IEC and North American MV cable voltage classes different?
IEC cable pages normally use U0/U(Jedan) voltage designations such as 12/20(24)kV. North American MV cable schedules commonly use nominal voltage classes such as 5kV, 15kV, 25kV and 35kV, so XWA reviews the required standard scope before confirming the cable construction.
What MV cable constructions are available?
XWA supplies single-core and three-core MV cable constructions with copper or aluminum conductors, copper tape or copper wire screens, PVC, PE or LSZH sheaths and armored or unarmored options.
Can MV cable be armoured or water-blocked?
Da. XWA manufactures MV cable with steel wire armor, steel tape armor or aluminum wire armor for mechanical protection. Water-blocking layers and PE sheath options can be configured for underground, duct and wet-route conditions.
How does XWA control MV cable production quality?
XWA prepares MV cable production with conductor preparation, triple extrusion where applicable, ekranska aplikacija, armiranje, ekstruzija omotača, provjere dimenzija, voltage testing and routine test records according to the agreed specification.
How does XWA prepare MV cable offers?
XWA reviews voltage designation, materijal i veličina provodnika, core count, tip ekrana, oklop, materijal omotača, ruta instalacije, standard and drum length before preparing the cable construction and offer.
Contact XWA for MV Cable Projects
XWA prepares MV cable offers around voltage class, materijal provodnika, core construction, tip ekrana, oklop, sheath design and required standard, with cable construction matched to the confirmed project specification.