KVVP Cable for Screened Multicore Control Circuits

Nguồn XWA & Cáp | Cáp điều khiển

KVVP cable is a copper-conductor control cable with PVC insulation, a braided copper screen and a PVC sheath. Its 450/750 V construction serves fixed control, monitoring and protection circuits in industrial electrical installations.

Điện áp định mức: 450/750 V AC

The braid surrounds the multicore assembly, providing a screen connection for the installed circuit. KVVP keeps the familiar KVV insulation-and-sheath system while adding the metallic screen, making the distinction visible in both the designation and the layer arrangement.

KVVP 450/750 V cable sample with a copper braid screen and multiple insulated cores.
KVVP 450/750 V cable sample with a copper braid screen and multiple insulated cores.

KVVP cable construction

LớpSự thi công
dây dẫnđồng; solid or stranded construction specified by size
cách nhiệtPVC on each control core
Cuộc họpMultiple insulated cores laid together
Màn hìnhCopper wire braid around the assembly
Vỏ ngoàiPVC
KVVP Cable Layer Arrangement schematic
KVVP Cable Layer Arrangement schematic.

KVVP voltage and technical characteristics

tham sốCông trình đã chọn
Điện áp định mức450/750 V AC (U0/U)
Core materialsđồng / PVC insulation
Screen constructionCopper braid
Outer coveringPVC sheath
Photographed configuration21 × 1.5 mm²
Specification frameworkGB/T 9330 control-cable family

Screened control runs between plant equipment and panels

Monitoring and protection circuits can run between switchgear, local control stations and equipment panels. A multicore construction gathers those circuits into one route, while the copper braid provides a metallic screen around the insulated core assembly.

For a fixed industrial route, we would give core identification and the screen connection equal attention. They solve different practical problems: one supports accurate termination, while the other integrates the cable with the circuit screening and bonding arrangement.

KVVP is distinct from KVVP2, where the screen construction uses copper tape rather than the braid specified here. A steel-armoured suffix introduces another protective layer. Keeping these variants separate prevents the screen from being mistaken for mechanical armour.

The photographed sample is marked 21 × 1.5 mm² and 450/750 V.. That configuration is useful for showing how a high-core-count control cable is assembled. Other core counts change the diameter and termination space, so each configuration needs its own dimensional schedule.

KVVP Industrial Control Connections schematic
KVVP Industrial Control Connections schematic.

KVVP cable questions

What is the difference between KVV and KVVP?

KVVP adds a copper braid screen to the PVC-insulated and PVC-sheathed control construction. The screen is connected according to the installation bonding design.

Is KVVP steel-wire armoured?

The base KVVP construction uses a copper screen. A mechanically armoured control cable is identified and specified as a separate layer arrangement.

làm gì 21 × 1.5 mm² mean?

It denotes 21 insulated cores with a nominal conductor area of 1.5 mm² each. Circuit identification and any protective-conductor function follow the specified core arrangement.

Discuss your KVVP cable project

For a KVVP project quotation, send XWA the core count, dây dẫn khu vực, total length and screen specification. Include the project cable schedule when several control configurations are required.

    Nhận báo giá miễn phí tại 24 Giờ

    E-mail*:

    Tên*:

    Đất nước của bạn:

    Điện thoại*:

    Yêu cầu của bạn*: