Kuasa XWA & kabel | Model Kabel Getah
Type W for large-section portable power and temporary feeders
Voltan terkadar: 2 kV AC (2,000 V)
Type W cable is a heavy-duty portable power cable with flexible copper conductors, elastomer insulation and a rugged outer jacket. Single-conductor and multicore constructions support different temporary power and industrial equipment circuits.
Large conductor sizes make Type W relevant to generator connections, mobile plant and temporary distribution. A single-core feeder and a four-core equipment lead belong to the same broad family, but their connector arrangement, cable handling and grounding design are different.

2,000 V reference family
Type W conductor and layer arrangement

| Komponen | Pembinaan |
|---|---|
| Power conductor | Flexible rope-lay copper stranding. |
| Separator | Tape between copper and insulation where required by the selected design. |
| Penebat | EPDM or the specified elastomer system. |
| Assembly and binder | Single-core or selected multicore arrangement, with reinforcement as designed. |
| Jaket | Heavy-duty CPE or the selected equivalent compound system. |
UL 1650 and CSA C22.2 No. 96 cover portable power cable construction. The single-core reference below uses flexible copper, EPDM insulation and a CPE jacket at a 2,000 V rating.
Type W reference sizes and technical data
| Single-core size | Penebat (mil) | Jaket (mil) | lebih kurang. DARIPADA (in) | Mass (lb/1000 ft) | R25 (ohm/1000 ft) |
|---|---|---|---|---|---|
| 1/0 AWG | 80 | 105 | 0.779 | 530 | 0.105 |
| 2/0 AWG | 80 | 105 | 0.848 | 637 | 0.084 |
| 3/0 AWG | 80 | 105 | 0.864 | 758 | 0.066 |
Selected single-core 2,000 V reference data; DC resistance at 25°C. One mil is 0.001 inci (0.0254 mm). Multicore dimensions follow a separate schedule; final supply data follows the agreed datasheet.
Single-core feeders and multicore leads solve different problems
Separate single-conductor cables can simplify handling of a high-current portable feeder. Phase identification, keserasian penyambung, routing and a properly designed grounding path then become important installation interfaces. A multicore assembly keeps the selected circuit conductors together inside one jacket, with a different overall diameter and handling weight.
We favour a circuit-level comparison: conductor loading, connector arrangement and handling space first, then the cable size. The Type W designation itself does not add a dedicated ground-check circuit; projects requiring continuity monitoring need a construction that includes that function.
Type W and related rubber cable types
| Keluarga kabel | Perbezaan yang berkaitan |
|---|---|
| Taip W | Portable power family, in single-conductor and multicore arrangements. |
| Taip G-GC | Three power conductors with grounding and a separate ground-check conductor. |
| H07RN-F | Metric harmonised rubber flexible family; voltage and conductor construction differ. |
For the wider context of Type W applications, meneroka julat kabel getah, H07RN-F cable dan kami Maklumat kilang XWA.
Type W cable questions
Does Type W include a ground-check wire?
A dedicated ground-check circuit is not inherent in Type W. Equipment requiring that function needs the corresponding monitored-ground construction and protection system.
Can AWG sizes be replaced by the nearest metric size?
AWG and mm² describe nominal conductor area through different size series. Rintangan, termination fit and the complete cable construction determine the proposed equivalent.
Is Type W only a single-core cable?
Tidak. Single-conductor and multicore products exist. The reference table on this page is specifically for single-core construction, not a multicore dimensional schedule.
Discuss a Type W cable project with XWA
Send your Type W cable schedule or equipment specification, panjang dan destinasi yang diperlukan untuk info@xwacable.com. Lukisan atau sebutan sedia ada adalah titik permulaan praktikal untuk perbincangan produk dan sebut harga.
Untuk konteks standard, lihat rujukan teknikal rasmi.
