Snaga XWA & Kabel | Special Cables
PV1-F solar cable connects DC circuits within photovoltaic installations. Flexible tinned copper, cross-linked insulation and an outer sheath support outdoor PV wiring and compact equipment connections.
Nazivni napon: 0.6/1 kV AC. DC maximum: 1.8 kV.
Solar cable available from stock. Single-core project sizes include 2.5, 4, 6, 10, 16, 25 i 35 mm². Required quantities and the selected construction define the order.

PV1-F conductor, insulation and sheath
The single-core construction keeps the flexible conductor inside two distinct protective layers. Tinned copper supports the termination interface, while insulation and the sheath each contribute to the cable system selected for outdoor PV service.
| Sloj | Reference construction |
|---|---|
| Dirigent | Klasa 5 flexible tinned copper |
| Izolacija | Cross-linked halogen-free compound |
| Plašt | Cross-linked protective compound |
| Core layout | Single-core version covered by the dimensional table |

PV1-F solar cable technical data
Rated voltage U0/U: 0.6/1 kV AC. DC maximum: 1.8 kV. The DC maximum and the rated operating voltage are separate specification fields.
| Conductor area (mm²) | cca. conductor OD (mm) | cca. cable OD (mm) | cca. masa (kg/km) | Maks. conductor resistance at 20°C (Ω/km) | Current at 60°C, single cable in air (A) |
|---|---|---|---|---|---|
| 1.5 | 1.60 | 4.6 | 31 | 13.7 | 30 |
| 2.5 | 2.02 | 5.1 | 42 | 8.21 | 41 |
| 4 | 2.59 | 5.9 | 61 | 5.09 | 55 |
| 6 | 3.17 | 6.6 | 83 | 3.39 | 70 |
| 10 | 4.10 | 7.6 | 125 | 1.95 | 98 |
| 16 | 5.50 | 9.2 | 188 | 1.24 | 132 |
| 25 | 6.70 | 10.6 | 280 | 0.795 | 176 |
| 35 | 8.20 | 12.2 | 380 | 0.565 | 218 |
Current values describe a single cable in air at 60°C. Grouping, enclosure, installation temperature and the circuit voltage drop affect the installed selection.
Twin PV1-F construction
The twin arrangement keeps two individually insulated conductors together for the DC route. Its cable dimensions, mass and thermal behaviour differ from the single-core version.
| Jezgre × površina (mm²) | Conductor OD (mm) | Cable dimensions (mm) | Masa (kg/km) | Maks. R20 (Ω/km) | Current at 60°C (A) |
|---|---|---|---|---|---|
| 2 × 4 | 2.59 | 5.7 × 11.7 | 124 | 5.09 | 44 |
| 2 × 6 | 3.17 | 6.4 × 13.1 | 169 | 3.39 | 57 |
Materials and operating characteristics
| Parametar | Selected PV1-F construction |
|---|---|
| Dirigent | Klasa 5 tinned annealed stranded copper |
| Insulation and outer sheath | Low-smoke, bez halogena, electron-beam cross-linked XLPO |
| Working temperature | −40°C to +90°C |
| Short-circuit temperature | 200°C for a maximum of 5 seconds |
| Minimalni radijus savijanja | Static: 4 × cable diameter; flexing: 5 × cable diameter |
| Mechanical pulling figure | 50 N/mm² of conductor cross-section |
Single-core and twin versions retain their own dimensional schedules. Terminals, cable entries and seals are selected for the actual conductor size and finished cable dimensions.
Module strings, equipment entries and connector fit
PV wiring brings module strings to their collection and conversion equipment. Cable support, strain relief and routing protect the connection as the installation experiences weather and thermal movement.
We would treat the connector and cable as a matched interface. Conductor area determines the terminal crimp range, while the outside diameter determines the cable-entry seal. A connector that fits one cable size is not automatically a complete match for another sheath diameter.

Solar connector options can be discussed alongside the cable order. The connector manufacturer and interface are specified for the intended system; a familiar connector shape alone does not establish cross-brand compatibility.
PV1-F, H1Z2Z2-K and additional solar configurations
| Configuration | Product distinction |
|---|---|
| PV1-F | Legacy photovoltaic cable designation; selected construction and rating specified separately. |
| H1Z2Z2-K | Photovoltaic designation associated with EN 50618; separate electrical and construction specification. |
| Twin-core DC cable | 2 × 4, 2 × 6 i 2 × 10 mm² configurations in the supplied product schedule. |
| Armoured twin-core DC cable | 2 × 4 i 2 × 6 mm² configurations, requiring their own armour and installation specification. |
The twin-core and armoured options form separate DC cable constructions, rather than automatic extensions of the single-core PV1-F or H1Z2Z2-K standard designation.
Explore the existing H1Z2Z2-K solar cable page i naše cable factory.
PV1-F product questions
Is solar cable available from stock?
Da. XWA offers solar cable from stock. The selected model, veličina, colour and required length define the supply discussion.
Are PV1-F and H1Z2Z2-K interchangeable?
They are separate designations. A replacement follows the project specification, rated voltage and matching cable documentation.
Can a solar cable order include connectors?
Connector options can be discussed with the cable requirement. Conductor area, cable diameter and the specified mating interface determine the assembly.
Discuss solar cable supply with XWA
Send your PV1-F or H1Z2Z2-K cable schedule, required lengths and connector details. Our team can discuss the stock cable options and the configuration suited to your PV connection.
